The compact trailer concrete pump P715 with S-valve systems

The small, light and efficient double piston pump P715 for pumping of fine concrete, shotcrete and self leveling floor screed.
The P715 is a full hydraulically driven pump, perfect to feed from truck mixers with wet mixes up to 16mm grain size.
The P715 works with a maximum pumping pressure of 68bar. It is a low-wear and easy to maintain unit due to the S-valve system with its automatic sealing effect.

Applications

 

The double piston pump P715 is the perfect small pumping unit for wet mixes with up to 16mm grain size.

Whether pouring, concreting, shotcreting, grouting, filling, pressure pointing or leveling, the P715 covers a huge variety of applications.

Fed by truck mixers, dumpers or continuous mixers, the P715 pumps concrete, anhydride or cement based liquid screeds, mortars, grouts, etc.

In combination with a site compressor (requested air performance approx. 4m³/min.) the P715 is an ideal and simple shotcrete unit.


P715 TD

Function

The selectable Diesel engine or electric motor gives the power for the hydraulic system to drive the hydraulic cylinders, S-tube and the agitator inside the hopper.

Two alternate working pistons suck the pumping media from the hopper, controlled by the swinging S-tube, and push it with up to 68bar working pressure into the delivery line.

All functions can be set at the control panel of the P715 (even the strokes per minute, respectively the output) or with the cable remote control.

Optional available is a radio remote control.
P715 TD

Advantages

The P715 is a hydraulically driven double piston pump providing maximum performance on a small trailer, also available as a stationary version with mountings for fork-lift use, manufactured by Putzmeister Mörtelmaschinen GmbH.

The S-valve system allows pump pressures up to 68bar and is even seal-proof for slurries and water.

An agitator inside the hopper avoids segregation and feeds the pump cylinders. The top of the hopper, equipped with a rubber collar, is secured by a folding 30mm safety grid with fixed 12V vibrator for better material passing, as well as a safety shut-off for the agitator.

Enjoy the easy cleaning access by the folding hopper attachment - also for service works - and a bottom flap to empty the hopper.

The pumping rate is infinitely variable, manually adjustable at the control board. All main functions can also be controlled at the remote control device.

The maximum pumping pressure can be set to 68bar or to 40bar when working with ordinary mortar hoses for maximum 40bar working pressure.

Optional available: radio remote control, central lubrication system, high pressure cleaner, flushing pump, central lifting eye, hoses, pipes, ball hitch, etc.

Please contact us for details.
P715 TD

P715 SD

Technical Data


P715TD
P715SD
P715TE
P715SE





Power supply/motor 3-cylinder Diesel 3-cylinder Diesel 3~400V/50Hz
3~400V/50Hz
Drive 34.5kW 34.5kW 30kW 30kW
Output 4 - 17.4m³/h 4 - 17.4m³/h 4 - 18.2m³/h 4 - 18.2m³/h
Pumping pressure 68bar 68bar
68bar 68bar
Cyliner Ø / Stroke
150mm / 700mm 150mm / 700mm 150mm / 700mm 150mm / 700mm
Stroke per minute 27 27 27 27
Drive motor
Deutz D L03 2011 Deutz D L03 2011 electric motor
electric motor
Hopper volume 250l (280l, rubber)
250l (280l, rubber)
250l (280l, rubber) 250l (280l, rubber)
Chassis
1900kg, with brakes skid frame
1900kg, with brakes skid frame
Weight
1850kg 1700kg
1800kg 1650kg
Dimensions LxWxH 4200x1510x1600mm 3067x1393x1395mm 4200x1510x1600mm 3067x1393x1395mm
Filling height 1180mm 973mm 1180mm 973mm
Grain size up to 16mm up to 16mm up to 16mm up to 16mm
Outlet
SK 4.5"
SK 4.5"
SK 4.5" SK 4.5"
Part no.
500084 500085 500086 500087





Standard equipment: standard tools
documentation
standard tools
documentation
standard tools
documentation
standard tools
documentation





Brochure P715 for download >>

Accessories

P715



Set for pumping of liquid screed and mortar, 80m, ID50, 40bar, up to 8mm grain size:

consisting of:
- 5x clamp coupling SK4.5"
- 5x gasket ID100, 4.5"
- 6x securing cotter pin
- 2x delivery pipe 90°, SK100/4.5"
- 1x T-delivery pipe SK100/4.5", 1m
- 1x pressure gauge SK100/4.5", 100bar
- 1x reducer pipe SK100/4.5"- SK65/3", 1.5m
- 1x clamp coupling SK3"
- 1x gasket ID65, 3"
- 1x transition piece ID50, SK3"/2" external thread
- 1x coupling V50, RI2"
- 6x mortar hose ID50, 40bar, V50-M50, 13.3m
- 6x sponge ball, D120mm
- 6x sponge ball ID50mm
P/N 600430


600431
600432
600433
600434
600435
600436
600442
600443
600444
600445
600102
600063
600282
600175


Set for shotcreting, 60m, ID50, 40bar, SK65/3", up to 8mm grain size*:

consisting of:
- 5x clamp coupling SK4.5"
- 5x gasket ID100, 4.5"
- 16x securing cotter pin
- 2x delivery pipe 90°, SK100/4.5"
- 1x T-delivery pipe SK100/4.5", 1m
- 1x pressure gauge SK100/4.5", 100bar
- 1x reducer pipe SK100/4.5"-SK65/3", 1m
- 11x clamp coupling SK3"
- 11x gasket ID65, 3"
- 9x delivery hose SK65/3", 5m
- 1x reducer pipe SK65/3"-SK50/3", 1m
- 1x transition piece ID50, SK3"/2" external thread
- 1x coupling M50, 2" internal thread
- 1x mortar hose ID50, 40bar, V50-M50, 13.3m
- 1x shotcrete spray gun V50, D30mm
- 3x air hose ¾", 20m, clamp couplings
- 6x sponge ball, D120mm
- 6x sponge ball, ID80mm
- 6x sponge ball, ID50mm

* site compressor with >2.5m³/min required

air driven accelerator pump supplement:
- 1x silicate metering pump with air drive (barrel pump)
- 3x high-pressure hose ½", 20m (barrel pump to spray gun)
- 1x air hose ¾", 20m, clamp couplings (compressor to barrel pump)
P/N 600446


600431
600432
600433
600434
600435
600436
600447
600443
600444
600469
600470
600445
600108
600063
600410
600428
600282
600004
600175




600471
600472
600428

Set for shotcreting with high-pressure line, 60m, 85bar, SK65/SK50, up to 10mm grain size*:

consisting of:
- 5x clamp coupling SK4.5"
- 5x gasket ID100, 4.5"
- 19x securing cotter pin
- 2x delivery pipe 90°, SK100/4.5"
- 1x T-delivery pipe SK100/4.5", 1m
- 1x pressure gauge SK100/4.5", 100bar
- 1x reducer pipe SK100/4.5"-SK65/3", 1m
- 14x clamp coupling SK3"
- 14x gasket ID65, 3"
- 8x delivery hose SK65/3", 5m
- 1x reducer pipe SK65/3"-SK50/3", 1m
- 4x delivery hose SK50/3", 5m
- 1x transition piece ID50, SK3"/2" internal thread
- 1x high-pressure shotcrete spray gun with rubber nozzle, 2" external thread
- 1x replacement rubber nozzle
- 1x Geka 3⁄8" external thread
- 3x air hose ¾", 20m, clamp couplings
- 6x sponge ball, D120mm
- 6x sponge ball, ID80mm
- 6x sponge ball, ID50mm

* site compressor with >2.5m³/min required

air driven accelerator pump supplement:
- 1x silicate metering pump with air drive (barrel pump)
- 3x high-pressure hose ½", 20m (barrel pump to spray gun)
- 1x air hose ¾", 20m, clamp couplings (compressor to barrel pump)
P/N 600473


600431
600432
600433
600434
600435
600436
600447
600443
600444
600469
600470
600474
600445
600475
600476
600112
600428
600282
600004
600175




600471
600472
600428

Set for pumping of fine concrete, 100m, SK100/4.5", 85 bar, up to 16mm grain size:

consisting of:
- 47x clamp coupling SK4.5"
- 47x gasket ID100, 4.5"
- 47x securing cotter pin
- 4x delivery pipe 90°, SK100/4.5"
- 1x T-delivery pipe SK100/4.5", 1m
- 1x pressure gauge SK100/4.5", 100bar
- 30x delivery pipe SK100/4.5", 3m
- 4x delivery pipe SK100/4.5", 2m
- 2x delivery pipe SK100/4.5", 1m
- 4x delivery pipe 45°, SK100/4.5"
- 1x delivery hose SK100/4.5", 2.85m
- 6x sponge ball, D120mm

suggested additonal accessories:
- 1x steel pipe mount for wall and ground
P/N 600477


600431
600432
600433
600434
600435
600436
600437
600438
600439
600440
600441
600282


600479

Set for pumping of fine concrete with hoses, 50m, 85bar, ID100/4.5", up to 16mm grain size:

consisting of:
- 22x clamp coupling SK4.5"
- 22x gasket ID100, 4.5"
- 22x securing cotter pin
- 2x delivery pipe 90°, SK100/4.5"
- 1x T-delivery pipe SK100/4.5", 1m
- 1x pressure gauge SK100/4.5", 100bar
- 18x delivery hose SK100/4.5", 2.85m
- 6x sponge ball, D120mm
P/N 600478


600431
600432
600433
600434
600435
600436
600441
600282

These sets are just samples out of our program.
For more accessories and tools please have a look under accessories or in our catalogue.
Please contact us for detailed information.