The SP11 worm pump with diesel engine and modern hydraulic drive

The SP11 trailer pump, equipped with a Kubota Diesel engine, makes you independent from any electric supply.
The strong and comfortable to fill hydraulically driven lift-up mixer produces batchwise homogeneous wet mortars.
The low-maintenance hydraulic drive with comfortable output setting stands for a comfortable operation with ease of maintenance.

Applications

The SP11 LMR is a hydraulic driven worm pump with diesel engine for working independent from any electric supply.

It will mix, pump and even spray mortars with up to maximum 6mm grain size.

The SP11 LMR processes site-mixes or preblended dry mortars for interior and external plastering supplied in bags:

  • Monochouche (Monocapa)
  • fire-proofing mortar
  • base coat plaster
  • lightweight masonry mortar
  • ornamental plaster
  • concrete repair mortar
  • fiber mortar
  • mortars for filling/grouting work
  • etc.

SP11 LMR

 

Function

The trailer SP11 LMR is a worm pump with a hydraulic driven lift-up mixer and mechanical water dosing system to prepare batchwise homogeneuous wet mixtures to fill the wet mortar hopper for a continuous pumping process.

The hydraulic driven rotor-stator pump with infinitely speed regulation will pump the wet mortar through the connected hoses for the required distance.

A built-in compressor with air remote control gives the applicator the possibility to start/stop the pump drive from the place of work when using a spray gun with air valve.

SP11 LMR



Advantages

The worm pump SP11 LMR, produced by Putzmeister Mörtelmaschinen GmbH, is powered by a 16.3kW Kubota 3-cylinder Diesel engine.

The hydraulic system allows variable output adjustments, is easy to maintain, long-lasting and wear resistant.

Compared to piston pumps are worm pumps smooth, simple to operate and to clean with the built-in high pressure water cleaner.

All controls are easy to watch and to reach for the operator.

The protective grids of the mixer and wet mortar hopper are equipped with safety switches, so the hydraulic drive will stop immediately when opening any grid.

The trailer with ball hitch is approved for road use.

Optional available are: a vibrating screen, ring hitch for towing with trucks, support wheel, working light, mortar hoses in different length and diameter, air hoses, couplings, different spray guns and nozzles, etc.

Please contact us for more information.

SP11 LMR



Technical Data

SP11 LMR

Output 5 - 60l/min*
Worm pump 2L6
Grain size maximum 6mm
Pumping pressure 25bar
Pumping distance up to 120m**
Pumping height up to 60m**
Engine 3-cylinder Kubota Diesel
Power 16.3kW
Hopper volume 220l
Mixer volume 180l
Filling height 880mm
Compressor 2-cylinder, 400l/min, 7bar
Outlet M50
Chassis without brakes, approved for road use
Weight
750kg
Dimensions LxWxH 3540x1420x1150mm
Part no. 500043
Standard equipment: documentation

* The output rate is theoretical and depends on the used worm pump type. The delivery rate may be higher or lower.
** Pumping distance and height is based on experience and depends on the pumping media.
Brochure SP11 for download >>

Accessories

SP11



Set for dry mortar spraying works:

consisting of:
- 1x mortar hose ID50, 13.3m
- 1x mortar hose ID35, V50-M35, 13.3m
- 1x mortar hose ID25, V35-V25, 10m
- 3x air hose ID1/2", 13.3m
- 1x spray gun M25
- 3x hose holder
- 4x sponge ball ID25mm
- 4x sponge ball ID35mm
- 4x sponge ball ID50mm
P/N 600423


600063
600427
600417
600065
600364
600180
600172
600174
600175
Set for dry mortar spraying works

Set for site mix mortar spraying works:

consisting of:
- 2x mortar hose ID50, 13.3m
- 1x mortar hose ID35, V50-M35, 13.3m
- 3x air hose ID1/2", 13.3m
- 1x spray gun for site mix, V35
- 3x hose holder
- 4x sponge ball ID35mm
- 4x sponge ball ID50mm
P/N 600424


600063
600427
600065
600365
600180
600174
600175
Set for site mix mortar spraying works

Set for injection works:

consisting of:
- 3x mortar hose ID50, 13.3m
- 3x air hose 1/2", 13.3m
- 1x injection lance
- 3x hose holder
- 4x sponge ball ID50mm
P/N 600425


600063
600065
600406
600180
600175
Set for injection works

These sets are just samples out of our program.
For more accessories and tools please have a look under accessories or in our catalogue.
Please contact us for detailed information.