The WP5 is a worm pump which can be applied just about anywhere

The all-purpose worm pump WP5 with its electronic output control is ideal for processing all pumpable materials in the wide variety of application areas.
Two different add-on mixer are available to prepare a perfect homogeneous wet mix: The positive action mixer M80 and the continuous mixer G40.
The WP5 „Bulldog“, offers functionality combined with easy handling, transport and simple operation.

Applications


The WP5 "Bulldog" is the most sophisticated electric driven worm pump in the product range. 

With its infinitely variable output control it is the best solution to cover a huge variety of applications, especially concrete refurbishing and fire-proofing, as well as :
  • grouting
  • filling
  • spraying
  • plastering
  • injecting
  • coating
  • levelling
  • etc.
The WP5 works with any common preblended dry mortars up to 6mm grain size, with the optional 2L54 stator even up to 10mm grain size.

The best choice for:
  • cement mortar
  • lime cement mortar
  • lime mortar
  • fire-proofing mortar
  • fire resistant mortar
  • insulating mortar
  • grout
  • texture
  • clay mortar
  • self-levelling underlayment and compound
  • bonding and reinforcement mortar
  • finish and decoration coating
  • filler
  • fibre and repair mortar
  • etc.
Besides this wet mortars or paste-like materials the WP5 can be even used for pumping site mixes.

The WP5 "Bulldog", one unit for:
  • plastering
  • filling
  • liquid floor screed
  • small concrete works
  • shotcrete
and much more...Bulldog
The WP5 is a worm pump which can be applied just about anywhere

















WP5 with M80
WP5 (2L54) with batch mixer M80

Function

An electronic frequency converter allows to regulate the speed of the pump drive.

The cardan shaft inside the wet material hopper is feeding and driving the simply plugged rotor of the worm pump to build up pressure to pump the material from the hopper through any connected flexible rubber hoses.

The optional cable or pneumatic remote control allows to start and stop the unit from the place of action.

The WP5 is a worm pump which can be applied just about anywhere

Advantages

The WP5 is a powerful worm pump with electronic output regulation - no belt drive to maintain. It works with a 50Hz and 60Hz mains supply.

Wedges for fixing the electric drive at the rear and a wedge closing device consisting of an outlet with fixed tie rods and pressure gauge in one, makes it easy to dismantle, exchange parts and to service the pump.

The new wedge closing device works for the standard 2L6 and for other sized stators, e.g. the 2L54 for up to 10mm grain size.

The position of the big wheels can be changed in many ways to have lower filling height, to give more clearance underneath the chassis to maneuver on difficult job site conditions, or to balance the complete unit according your wishes.

The rear with the drive of the WP5 is covered to protect from dust and dirt. The complete housing with the control box can be removed for service and transport.

Regarding transport, when removing the rear with the drive, as well as the front consisting of outlet with the worm pump, the whole WP5 can be easily stored in any van or even station wagon.

A mixer can be placed on the WP5 and fixed with simple wedge closing bolts (included in the standard equipment of the M80 and G40):
- The batchwise working positive action mixer M80 is available to upgrade the WP5 worm pump to a mixing and pumping unit for applying all kind of pumpable materials.
- For automatic and continuous mixing of preblended dry mortars you can upgrade the WP5 with the easy to build-on turbo continuous mixer G40.

A comprehensive range of accessories are available to set up the WP5 to cover all your needs:
compressors for spraying works, air remote control, cable remote control and extension, pressure limiter device, different worm pumps, rubber hoses in different length and diameter, connections, valves, spray guns and nozzles, etc.

Please contact us for details.
The WP5 is a worm pump which can be applied just about anywhere

Technical Data

WP5 (worm pump)
M80 (batch mixer)
G40 (turbo continuous mixer)

Power supply 3~400V/50-60Hz 3~400V/50-60Hz 3~400V/50-60Hz
Output 5 - 50l/min - -
Worm pump 2L6 - -
Pumping pressure up to 40bar - -
Pumping distance 60m - -
Pumping height 40m - -
Drive 5.5kW 2.2kW 3kW
Hopper volume
100l 80l 80l
Outlet M50 - -
Weight 195kg 210kg 170kg
Dimensions LxWxH 2380x690x630mm 1300x680x500mm 1300x680x500mm
Part no. 500024 500029 500027
P/N for 3~230V/60Hz 500025 500026 500030

Standard equipment: outlet with gauge
documentation
grid with safety switch
wedge fixations to bold on WP5
documentation
control device
level sensor
wedge fixations to bold WP5
documentation
Brochure WP5 for download >>

Accessories

WP5-400V



Set for site mix mortar spraying works:

consisting of:
- 1x air remote control
- 1x compressor V-Meko, 400V
- 2x mortar hose ID50, 13.3m
- 1x mortar hose ID35, V50-M35, 13.3m
- 3x air hose ID1/2", 13.3m
- 1x spray gun for site mix, V35
- 3x hose holder
- 4x sponge ball ID50mm
- 4x sponge ball ID35mm
P/N 600490


600315
600316
600063
600427
600065
600365
600180
600175
600174
Set for site mix mortar spraying works

Set for dry mortar spraying works:

consisting of:
- 1x air remote control
- 1x compressor V-Meko, 400V
- 1x reduction V50-M35
- 2x mortar hose ID35, 13.3m
- 1x reduction V35-V25
- 1x mortar hose ID25, 13.3m
- 3x air hose ID1/2", 13.3m
- 1x spray gun M25
- 3x hose holder
- 4x sponge ball ID25mm
- 4x sponge ball ID35mm
P/N 600317


600315
600316
600332
600061
600144
600059
600065
600364
600180
600172
600174
Set for dry mortar spraying works

Set for coating and finishing works:

consisting of:
- 1x air remote control
- 1x compressor V-Meko, 400V
- 1x reduction V50-M35
- 2x mortar hose ID35, 13.3m
- 1x reduction V35-V25
- 1x mortar hose ID25, 13.3m
- 3x air hose 1/2", 13.3m
- 1x nozzle set for finishing spray gun
- 1x finishing spray gun NW19, 2m, M25
- 3x hose holder
- 4x sponge ball ID25mm
- 4x sponge ball ID35mm
P/N 600318


600315
600316
600332
600061
600144
600059
600065
600026
600179
600180
600172
600174
Set for coating and finishing works

WP5-400V / WP5-230V


Set for grouting and filling works:

consisting of:
- 1x reduction V50-M35
- 2x mortar hose ID35mm, 13.3m
- 1x reduction V35-V25
- 1x mortar hose ID25, 13.3m
- 1x extension remote control cable, 20m
- 1x filling gun with cable remote control, 20m, M25
- 3x hose holder
- 4x sponge ball ID25mm
- 4x sponge ball ID35mm
P/N 600319


600332
600061
600144
600059
600314
600149
600180
600172
600174
Set for grouting and filling works

Set for pumping up to 10mm grain size:

consisting of:
- 1x rotor 2L54
- 1x stator 2L54
- 3x mortar hose ID50mm, 13.3m
- 1x cable remote control, 20m
- 1x extension remote control cable, 20m
- 3x hose holder
- 4x sponge ball ID50mm
P/N 600320


600301
600300
600063
600162
600314
600180
600175
Set for pumping up to 10mm grain size

These sets are just samples out of our program.
For more accessories and tools please have a look under accessories or in our catalogue.
Please contact us for detailed information.