concrete pump P715

The compact trailer concrete pump P715 with S-valve system

P715

The small, light and efficient double piston pump P715 for pumping of fine concrete, shotcrete and self leveling floor screed. 

The P715 is a full hydraulically driven pump, perfect to feed from truck mixers with wet mixes up to 16mm grain size.
The P715 works with a maximum pumping pressure of 68bar. It is a low-wear and easy to maintain unit due to the S-valve system with its automatic sealing effect.

  • The double piston pump P715 is the perfect small pumping unit for wet mixes with up to 16mm grain size.

    Whether pouring, concreting, shotcreting, grouting, filling, pressure pointing or leveling, the P715 covers a huge variety of applications. 

    Fed by truck mixers, dumpers or continuous mixers, the P715 pumps concrete, anhydride or cement based liquid screeds, mortars, grouts, etc. 

    In combination with a site compressor (requested air performance approx. 4m³/min.) the P715 is an ideal and simple shotcrete unit. 

  • The selectable Diesel engine or electric motor gives the power for the hydraulic system to drive the hydraulic cylinders, S-tube and the agitator inside the hopper.

    Two alternate working pistons suck the pumping media from the hopper, controlled by the swinging S-tube, and push it with up to 68bar working pressure into the delivery line.

    All functions can be set at the control panel of the P715 (even the strokes per minute, respectively the output) or with the cable remote control. 

    Optional available is a radio remote control. 

  •   P715TD P715SD
    P715TE
    P715SE
             
    Power supply/motor 3-cylinder Diesel 3-cylinder Diesel 3~400V/50Hz 3~400V/50Hz
    Drive 34.5kW 34.5kW 30kW 30kW
    Output 4 - 17.4m³/h 4 - 17.4m³/h 4 - 18.2m³/h 4 - 18.2m³/h
    Pumping pressure 68bar 68bar 68bar 68bar
    Cyliner Ø / Stroke 150mm / 700mm 150mm / 700mm 150mm / 700mm 150mm / 700mm
    Stroke per minute 27 27 27 27
    Drive motor Deutz D L03 2011 Deutz D L03 2011 electric motor electric motor
    Hopper volume 250l (280l, rubber) 250l (280l, rubber) 250l (280l, rubber) 250l (280l, rubber)
    Chassis 1900kg, with brakes skid frame 1900kg, with brakes skid frame
    Weight 1850kg 1700kg 1800kg 1650kg
    Dimensions LxWxH 4200x1510x1600mm 3067x1393x1395mm 4200x1510x1600mm 3067x1393x1395mm
    Filling height 1180mm 973mm 1180mm 973mm
    Grain size up to 16mm up to 16mm up to 16mm up to 16mm
    Outlet SK 4.5" SK 4.5" SK 4.5" SK 4.5"
    Part no.  500084 500085 500086 500087
             
    Standard equipment: standard tools
    documentation
    standard tools
    documentation
    standard tools
    documentation
    standard tools
    documentation
  • 600430 Set for pumping of liquid screed and mortar, 80m, ID50, 40bar, up to 8mm grain size 600430
    600431 clamp coupling SK4.5"
    600432 gasket ID100, 4.5"
    600433 securing cotter pin
    600434 delivery pipe 90°, SK100/4.5"
    600435 T-delivery pipe SK100/4.5", 1m
    600436 pressure gauge SK100/4.5", 100bar
    600442 reducer pipe SK100/4.5"- SK65/3", 1.5m
    600443 clamp coupling SK3"
    600444 gasket ID65, 3"
    600445 transition piece ID50, SK3"/2" external thread
    600110 coupling V50 internal thread 2”, stainless steel
    600063 mortar hose ID50, 13.3m
    600282 sponge ball, D120mm
    600175 sponge ball ID50mm
    600446 Set for shotcreting, 60m, ID50, 40bar, SK65/3", up to 8mm grain size* 600446
    600431 clamp coupling SK4.5"
    600432 gasket ID100, 4.5"
    600433 securing cotter pin
    600434 delivery pipe 90°, SK100/4.5"
    600435 T-delivery pipe SK100/4.5", 1m
    600436 pressure gauge SK100/4.5", 100bar
    600442 reducer pipe SK100/4.5"- SK65/3", 1.5m
    600443 clamp coupling SK3"
    600444 gasket ID65, 3"
    600469 delivery hose SK65/3", 5m
    600470 reducer pipe SK65/3"-SK50/3", 1m
    600445 transition piece ID50, SK3"/2" external thread
    600108 coupling M50 internal thread 2"
    600063 mortar hose ID50, 13.3m
    600410 shotcrete spray gun, V50
    600428 air hose 3/4", 20m, claw couplings
    600282 sponge ball, D120mm
    600004 sponge ball, ID80mm
    600175 sponge ball ID50mm

    * site compressor with >2.5m³/min required

    600473 Set for shotcreting with high-pressure line, 60m, 85bar, SK65/SK50, up to 10mm grain size 600473
    600431 clamp coupling SK4.5"
    600432 gasket ID100, 4.5"
    600433 securing cotter pin
    600434 delivery pipe 90°, SK100/4.5"
    600436 pressure gauge SK100/4.5", 100bar
    600443 reducer pipe SK100/4.5"-SK65/3", 1m
    600443 clamp coupling SK3"
    600444 gasket ID65, 3"
    600469 delivery hose SK65/3", 5m
    600470 reducer pipe SK65/3"-SK50/3", 1m
    600445 delivery hose SK50/3", 5m
    600445 transition piece ID50, SK3"/2" external thread
    600476 high-pressure shotcrete spray gun with rubber nozzle, 2" external thread
    600112 replacement rubber nozzle
    600112 Geka coupling external thread 3/8"
    600428 air hose 3/4", 20m, claw couplings
    600282 sponge ball, D120mm
    600004 sponge ball, ID80mm
    600175 sponge ball ID50mm

    * site compressor with >2.5m³/min required

    600477 Set for pumping of fine concrete, 100m, SK100/4.5", 85 bar, up to 16mm grain size 600477
    600431 clamp coupling SK4.5"
    600432 gasket ID100, 4.5"
    600433 securing cotter pin
    600434 delivery pipe 90°, SK100/4.5"
    600435 T-delivery pipe SK100/4.5", 1m
    600436 pressure gauge SK100/4.5", 100bar
    600437 delivery pipe SK100/4.5", 3m
    600438 delivery pipe SK100/4.5", 2m
    600439 delivery pipe SK100/4.5", 1m
    600440 delivery pipe 45°, SK100/4.5"
    600441 delivery hose SK100/4.5", 2.85m
    600282 sponge ball, D120mm
    600478 Set for pumping of fine concrete with hoses, 50m, 85bar, ID100/4.5", up to 16mm grain size
    600431 clamp coupling SK4.5"
    600432 gasket ID100, 4.5"
    600433 securing cotter pin
    600434 delivery pipe 90°, SK100/4.5"
    600435 T-delivery pipe SK100/4.5", 1m
    600436 pressure gauge SK100/4.5", 100bar
    600441 delivery hose SK100/4.5", 2.85m
    600282 sponge ball, D120mm

    These sets are just samples out of our program.
    For more accessories and tools please have a look under accessories or in our catalogue.
    Please contact us for detailed informations.

Enquiry

Do you have any questions concerning this product? Get in contact with us!
Cookies facilitate the provision of our services. By using our services, you agree to the use of cookies, taking note of our privacy policy.
privacy statement OK