Pneumatic Conveyors M500

The electric driven pneumatic conveyor Mixokret M500

M500

The pneumatic conveyor Mixokret M500 with its powerful 18.5kW electric drive is the professional and economic solution for mixing and conveying of screed, mortar, concrete,  gravel and sand.

For conveying is a separate site compressor with >4m³/min air volume necessary.
The Mixokret M500 with its 650 liter vessel is characterized by simple operation, easy handling and low maintenance.

  • The Mixokret M500 is an electric driven pneumatic conveyor with a big 650 liter pressure vessel. 

    It is the most economic solution when already a huge site compressor is available. Minimum requested air volume from the site compressor is 4m³ a minute. 

    The Mixokret M500 works great with all semi-dry and lean wet mixes, as well as dry materials which can‘t be pumped with worm or piston pumps. 

    For this reason the M500 is also called „sand pump“. 

    The M500 will handle the materials, such as:

    • sand
    • mortar
    • fine concrete
    • masonry mortar
    • cement based floor screed
    • anhydrite based floor screed
    • gravel
    • roof covering
    • soil
    • etc.


    all up to 16mm, with some small modifications and the use of big-sized conveying hoses and discharge stand even up to 32mm grain size. 

  • The pressure vessel is filled manually with a shovel and bucket. 

    Mixing paddles inside the vessel will prepare a high-quality wet mixture if required.

    The connected site compressor, which is not included in the scope of delivery, will provide air to convey the material from the closed pressure vessel through the hoses to the discharge stand at the end of the conveying line. 

    The better the performance of the separate site compressor, the faster and longer distance can be conveyed.

  •   M500E
       
    Power supply 3~400V/50Hz, CEE 63 socket,35Amp fuse
    Output* up to 6m³/h*
    Conveying distance* 270m
    Conveying height* 190m
    Drive 18.5kW
    Vessel capacity 650l
    Compressor** >4m³/min, 8ar
    Filling height 1140mm
    Grain size up to 16mm
    Outlet KKV70
    Chassis without brakes, to be driven on job site, not approved for road use
    Weight 980kg
    Dimensions LxWxH 3680x1400x1430mm
    Part no. 500057
       
    Standard equipment: discharge stand
    documentation

    * Output and conveying distance  depends on the air volume provided by the site compressor. Mentioned rates are close values for a site compressor with ~4m³/min air performance.
    ** The site compressor is not included in the scope of delivery.
  • 600228 Set for conveying up to 8mm grain size 600228
    600227 reduction KKM70-V50
    600062 mortar hose ID50mm, 40bar, V50/M50,10m
    hose holder
    600180 hose holder
    600175 sponge ball ID50mm
    600230 Set for conveying up to 16mm grain size
    600226 conveying hose ID65mm, KK70,10m
    hose holder
    600180 hose holder
    600004 sponge ball ID65mm
    600283 Set for conveying of concrete up to 25mm grain size
    600412 special outlet with KKV108 coupling
    600280 conveying hose ID90mm, 10bar, 10m, KK108
    concrete discharge stand, KKM108 coupling
    600281 concrete discharge stand, KKM108 coupling
    600282 sponge ball ID90mm

    These sets are just samples out of our program.
    For more accessories and tools please have a look under accessories or in our catalogue.
    Please contact us for detailed informations.

Enquiry

Do you have any questions concerning this product? Get in contact with us!
Cookies facilitate the provision of our services. By using our services, you agree to the use of cookies, taking note of our privacy policy.
privacy statement OK