Worm Pump WP6A

The WP6A is a worm pump which can be applied just about anywhere

WP6A

The WP6A is a worm pump which can be applied just about anywhere

The all-purpose worm pump WP6A with its electronic output control is ideal for processing all pumpable materials in the wide variety of application areas.
Two different add-on mixer are available to prepare a perfect homogeneous wet mix: The positive action mixer M80 and the continuous mixer G40.
The WP6A, offers functionality combined with easy handling, transport and simple operation.

  • The WP6A is the most sophisticated electric driven worm pump in the product range.  

    With its infinitely variable output control it is the best solution to cover a huge variety of applications, especially concrete refurbishing and fire-proofing, as well as :

    • grouting
    • filling
    • spraying
    • plastering
    • injecting
    • surface coating
    • levelling
    • etc.

    The WP6A works with any common preblended dry mortars up to 8mm grain size, with the optional 2L54 stator even up to 10mm grain size.

    The best choice for:

    • cement mortar
    • lime cement mortar
    • lime mortar
    • fire-proofing mortar
    • fire resistant mortar
    • insulating mortar
    • grout
    • texture
    • clay mortar
    • self-levelling underlayment and compound
    • bonding and reinforcement mortar
    • finish and decoration, surface coating
    • filler
    • fibre and repair mortar
    • etc.

    Besides this wet mortars or paste-like materials the WP6A can be even used for pumping site mixes. 

    The WP6A, one unit for:

    • plastering
    • filling
    • liquid floor screed
    • small concrete works
    • shotcrete
    •  foam concrete

    and much more...

  • An electronic frequency converter allows to regulate the speed of the pump drive.
    The cardan shaft inside the wet material hopper is feeding and driving the simply plugged rotor of the worm pump to build up pressure to pump the material from the hopper through any connected flexible rubber hoses.

    The optional pressure (adjustable)- or pneumatic remote control, cable remote control allows to start and stop, electronic output control, emergency stop swith, control the Pump unit from the place of action. 

  •   WP6A (worm pump)
    M80 (batch mixer)
    G40 (turbo continuous mixer)
           
    Power supply 3~400V/50-60Hz 3~400V/50-60Hz 3~400V/50-60Hz
    Output 1,5 - 120l/min - -
    Worm pump 2L74 - -
    Pumping pressure up to 40bar - -
    Pumping distance 100m - -
    Pumping height 50m - -
    Drive 7.5kW 2.2kW 3kW
    Hopper volume 100l 80l 80l
    Outlet M50 - -
    Weight 280kg 480kg 490kg
    Dimensions LxWxH 2580x690x630mm 2590x680x1140mm 2590x680x1150mm
    Part no. 500060 500029 500027
           
    P/N for 3~230V/60Hz 500061 500026 500030
           
    Standard equipment: outlet with gauge
    documentation
    grid with safety switch
    wedge fixations to bold on WP6A
    documentation
    control device
    level sensor
    wedge fixations to bold WP6A
    documentation
  • 600490 Set for site mix mortar spraying works 600490
    600315 air remote control
    600316 compressor V-Meko, 400V/50Hz
    600063 mortar hose ID50, 13.3m
    600427 mortar hose ID35, V50-M35, 13.3m
    600065 air hose 1/2", 13.3m, Geka
    600365 site mix spray gun, V35
    hose holder
    600180 hose holder
    600175 sponge ball ID50mm
    600174 sponge ball ID35mm
    600317 Set for dry mortar spraying works 600317
    600315 air remote control
    600316 compressor V-Meko, 400V/50Hz
    600145 reduction coupling V50/V35
    600427 mortar hose ID35, V50-M35, 13.3m
    600144 reduction coupling V25/V35
    600061 mortar hose 40bar, ID35mm, 13.3m, V35/M35
    600065 air hose 1/2", 13.3m, Geka
    600364 spray gun M25
    hose holder
    600180 hose holder
    600172 sponge ball ID25mm
    600174 sponge ball ID35mm
    600318 Set for coating and finishing works 600318
    600315 air remote control
    600316 compressor V-Meko, 400V/50Hz
    600145 reduction coupling V50/V35
    600427 mortar hose ID35, V50-M35, 13.3m
    600144 reduction coupling V25/V35
    600059 mortar hose 40bar, ID25mm, 13.3m, V25/M25
    600065 air hose 1/2", 13.3m, Geka
    600026 nozzle set for fine plastering spray gun
    fine plastering spray gun, 2m, ID19, M25
    600179 fine plastering spray gun, 2m, ID19, M25
    hose holder
    600180 hose holder
    600172 sponge ball ID25mm
    600174 sponge ball ID35mm
    600319 Set for grouting and filling works 600319
    600145 reduction coupling V50/V35
    600427 mortar hose ID35, V50-M35, 13.3m
    600144 reduction coupling V25/V35
    600059 mortar hose ID25, 13.3m
    600314 extension remote control cable, 20m
    600149 filling gun with cable remote control, 20m, M25
    hose holder
    600180 hose holder
    600172 sponge ball ID25mm
    600174 sponge ball ID35mm
    600320 Set for pumping up to 10mm grain size 600320
    600301 rotor 2L54 with slit
    600300 stator 2L54 with integrated clamp
    600063 mortar hose ID50, 13.3m
    600162 cable remote control, 20m
    600314 extension remote control cable, 20m
    hose holder
    600180 hose holder
    600175 sponge ball ID50mm

    These sets are just samples out of our program.
    For more accessories and tools please have a look under accessories or in our catalogue.
    Please contact us for detailed informations.

Enquiry

Do you have any questions concerning this product? Get in contact with us!
Cookies facilitate the provision of our services. By using our services, you agree to the use of cookies, taking note of our privacy policy.