Worm Pump SP11

The SP11 worm pump with diesel engine and modern hydraulic drive

SP11

The SP11 trailer pump, equipped with a Kubota Diesel engine, makes you independent from any electric supply.
The strong and comfortable to fill hydraulically driven lift-up mixer produces batchwise homogeneous wet mortars.
The low-maintenance hydraulic drive with comfortable output setting stands for a comfortable operation with ease of maintenance.

  • The SP11 LMR is a hydraulic driven worm pump with diesel engine for working independent from any electric supply. 

    It will mix, pump and even spray mortars with up to maximum 6mm grain size. 

    The SP11 LMR processes site-mixes or preblended dry mortars for interior and external plastering supplied in bags:

    • Monochouche (Monocapa)
    • fire-proofing mortar
    • base coat plaster
    • lightweight masonry mortar
    • ornamental plaster
    • concrete repair mortar
    • fiber mortar
    • mortars for filling/grouting work
    • etc.
  • The trailer SP11 LMR is a worm pump with a hydraulic driven lift-up mixer and mechanical water dosing system to prepare batchwise homogeneuous wet mixtures to fill the wet mortar hopper for a continuous pumping process.

    The hydraulic driven rotor-stator pump with infinitely speed regulation will pump the wet mortar through the connected hoses for the required distance. 

    A built-in compressor with air remote control gives the applicator the possibility to start/stop the pump drive from the place of work when using a spray gun with air valve.

  •   SP11 LMR
       
    Output 5 - 60l/min*
    Worm pump 2L6
    Grain size maximum 6mm
    Pumping pressure 25bar
    Pumping distance up to 120m**
    Pumping height up to 60m**
    Engine 3-cylinder Kubota Diesel
    Power 16.3kW
    Hopper volume 220l
    Mixer volume 180l
    Filling height 880mm
    Compressor 2-cylinder, 400l/min, 7bar
    Outlet M50
    Chassis without brakes, approved for road use
    Weight 750kg
    Dimensions LxWxH 3540x1420x1150mm
    Part no. 500043
       
    Standard equipment: documentation
       
      * The output rate is theoretical and depends on the used worm pump type. The delivery rate may be higher or lower.
    ** Pumping distance and height is based on experience and depends on the pumping media. 
  • 600423 Set for dry mortar spraying works 600423
    600063 mortar hose ID50, 13.3m
    600427 mortar hose ID35, V50-M35, 13.3m
    600059 mortar hose ID25, 13.3m
    600065 air hose 1/2", 13.3m, Geka
    600364 spray gun M25
    hose holder
    600180 hose holder
    600172 sponge ball ID25mm
    600174 sponge ball ID35mm
    600175 sponge ball ID50mm
    600424 Set for site mix mortar spraying works 600424
    600063 mortar hose ID50, 13.3m
    600427 mortar hose ID35, V50-M35, 13.3m
    600065 air hose 1/2", 13.3m, Geka
    600365 site mix spray gun, V35
    hose holder
    600180 hose holder
    600174 sponge ball ID35mm
    600175 sponge ball ID50mm
    600425 Set for injection works 600425
    600063 mortar hose ID50, 13.3m
    600065 air hose 1/2", 13.3m, Geka
    600406 injection lance
    hose holder
    600180 hose holder
    600175 sponge ball ID50mm

    These sets are just samples out of our program.
    For more accessories and tools please have a look under accessories or in our catalogue.
    Please contact us for detailed informations.

Enquiry

Do you have any questions concerning this product? Get in contact with us!
Cookies facilitate the provision of our services. By using our services, you agree to the use of cookies, taking note of our privacy policy.